Skip to content
HomeMint

Samsung washer not draining: causes and safe checks

Last reviewed by HomeMint Editorial4 min read

Most draining problems come from a clogged drain filter or a kinked drain hose. Both are easy to check once the washer is unplugged.

A Samsung washer that stops with water in the drum, or shows 5E, 5C or SC, is telling you it could not pump the water out in time. The pump is usually fine; something is slowing the water down.

Work through the checks below in order. They start with the simplest and none of them requires tools beyond a towel and a shallow tray.

Common symptoms

  • Water left in the drum at the end of a cycle
  • A 5E, 5C or SC code on the display
  • Clothes come out soaking wet
  • A humming sound with no water moving
  • The cycle stops before the final spin

Possible causes

Clogged drain (debris) filter

Coins, hair ties, lint and small socks collect in the filter at the bottom front of front-load models. This is the most common cause.

Kinked or blocked drain hose

A hose crushed behind the machine, or pushed too far down the standpipe, stops water from leaving.

Blocked household drain

If the standpipe or laundry sink is backed up, the washer has nowhere to send the water.

Too many suds

Too much detergent, or regular detergent in a high-efficiency machine, can slow draining and trigger a code.

A worn drain pump

Less common. A humming or grinding noise with no water movement, after the filter and hose are clear, suggests the pump itself.

Safe checks you can do yourself

  1. Unplug the washer. Switch it off and unplug it from the wall before touching anything.

    Caution: Never reach into or under the machine while it is plugged in.

  2. Look at the drain hose. Gently pull the washer forward and check that the drain hose is not kinked or crushed. Samsung says the hose end should sit about 15 to 20 cm into the standpipe, no deeper.

  3. Drain and clean the filter. On front-load models, open the small access door at the bottom front. Put a towel and a shallow tray underneath, pull out the small emergency drain tube and let the water run out, then turn the round filter anticlockwise to remove it and rinse it under a tap. Refit it by turning it clockwise until it locks, or it may leak.

    Caution: If a hot cycle was just running, wait about an hour for the water to cool.

  4. Check the household drain. Pour a jug of water into the standpipe or laundry sink. If it backs up, the blockage is in your plumbing rather than the washer.

  5. Run a spin or rinse-and-spin cycle. Plug the washer back in and run a drain or spin-only cycle with the drum empty. If the water leaves, run a full empty cycle to confirm.

Manufacturer information

  • Samsung Canada publishes owner's manuals and the full error-code list for each model at samsung.com/ca/support. Search by model number.
  • The model number is on a label inside the door rim or on the back panel.
  • Depending on the model, a drain problem shows as 5C, 5E, SC, SE or nd. Confirm the code for your model in its manual.

When to stop and call a professional

  • The code comes back after the filter and hose are clear.
  • The pump hums or grinds but no water moves.
  • You see water under the machine near the power cord or outlet.
  • There is a burning smell or the breaker trips when it tries to drain.

Common questions

What does 5E or 5C mean on a Samsung washer?

Both mean a drain error: the washer could not pump the water out quickly enough, or at all. Samsung uses 5C, 5E, SC, SE or nd for this, depending on the model. Check your manual to confirm.

Where is the drain filter on a top-load Samsung washer?

Many top-load models do not have a filter the user can reach. For those, check the drain hose and the household drain, and contact a technician if the problem continues.

Is it safe to open the washer door with water inside?

On a front-loader, drain the water through the small emergency tube first. Opening the door while water is above the door seal will spill it onto the floor.

Tutorial videos

Watching someone do it helps. Look for videos from the manufacturer or an established repair channel, and check that the model shown matches yours.

Search YouTube for this repair

Need a professional in Mississauga?

If the checks above did not solve it, see local businesses from HomeMint's own list, matched on the service you need and the area they serve.

Appliance repair in Mississauga

About this guide. Written by HomeMint (AI-assisted) and reviewed by HomeMint Editorial. It is general information, not a professional inspection. Appliances and homes differ: follow your owner's manual and stop if anything seems unsafe. In an emergency call 911.