Skip to content
HomeMint

Faucet leaking: common causes and what you can do

Last reviewed by HomeMint Editorial3 min read

Where the water appears tells you the cause: the spout means a worn cartridge or washer, the handle means an O-ring, under the sink means a loose connection.

Faucet leaks are slow, so they are easy to ignore, but a steady drip adds up over a month. Finding exactly where the water appears is most of the diagnosis.

Dry everything with a towel first, then watch for where the first drop forms.

Common symptoms

  • A steady drip from the spout when the tap is off
  • Water seeping around the handle
  • A damp cabinet floor under the sink
  • Water running back along the spout
  • Uneven or spraying flow

Possible causes

Dripping from the spout

A worn cartridge in a single-handle faucet, or a worn rubber washer or seat in an older two-handle faucet.

Leaking around the handle

A worn O-ring or a loose packing nut under the handle.

Water under the sink

A loose supply-line nut, a failing braided supply hose, or a weeping shut-off valve.

Weak or spraying flow

A clogged aerator at the tip of the spout, which can also make water run back along the spout.

Safe checks you can do yourself

  1. Find the source. Dry the faucet and the pipes underneath, then run the water and watch. Note whether it leaks all the time or only when the tap is on.

  2. Clean the aerator. Unscrew the tip of the spout by hand, rinse out the grit, and screw it back on.

  3. Snug the connections under the sink. Hand-tighten the nuts where the supply hoses meet the shut-off valves and the faucet. A small turn is usually enough.

    Caution: Do not over-tighten. Plastic nuts and old valves crack easily.

  4. Shut off the water if it is getting worse. Turn the small valves under the sink clockwise until they stop, or, if they have a lever, turn it a quarter turn so it sits across the pipe. That makes the leak safe while you decide what to do next.

    Caution: If a valve is stuck, do not force it. Use the main shut-off for the house instead.

  5. Replace the cartridge or washer, if you are comfortable. With the water off, the handle and cartridge can be removed on most faucets. Take the old part to a hardware store to match it exactly.

Manufacturer information

  • Cartridges are specific to the faucet's brand and model. The brand name is usually on the handle or base.
  • Moen, Delta and other major brands publish parts diagrams on their websites, and some offer replacement cartridges under warranty. Check your faucet's warranty terms.

When to stop and call a professional

  • The shut-off valve under the sink is seized or leaking.
  • The leak is inside the wall or cabinet base and you cannot see the source.
  • The faucet body is corroded or cracked.
  • Water has stained the ceiling or floor below.

Common questions

How much water does a dripping tap waste?

It depends on the drip rate, but even a slow drip runs to many litres a week. The bigger risk is usually damage to the cabinet or counter over time.

Do I need a plumber to replace a faucet cartridge?

Many homeowners do it themselves with the water shut off. Call a plumber if the shut-off valves do not work or the parts are corroded in place.

Tutorial videos

Watching someone do it helps. Look for videos from the manufacturer or an established repair channel, and check that the model shown matches yours.

Search YouTube for this repair

Need a professional in Mississauga?

If the checks above did not solve it, see local businesses from HomeMint's own list, matched on the service you need and the area they serve.

Plumbers in Mississauga

About this guide. Written by HomeMint (AI-assisted) and reviewed by HomeMint Editorial. It is general information, not a professional inspection. Appliances and homes differ: follow your owner's manual and stop if anything seems unsafe. In an emergency call 911.