Skip to content
HomeMint

Dryer not heating: what to check before calling for repair

Last reviewed by HomeMint Editorial3 min read

A blocked vent is the most common cause of a dryer that runs but does not dry, and it is also a fire risk worth fixing promptly.

When a dryer tumbles but the clothes come out damp, the heat is either not being made or not being carried away. Poor airflow is far more common than a failed heating part.

If you have a gas dryer and suspect the gas supply or burner, stop and call a licensed gas technician. If you ever smell gas, leave the home and call your gas utility or 911 from outside.

Common symptoms

  • The drum turns but the air stays cool
  • Clothes need two or more cycles to dry
  • The top of the dryer feels very hot
  • The laundry room is humid while it runs
  • A burning or musty smell

Possible causes

Clogged lint filter or vent

Lint in the filter, the flexible hose or the outside vent hood traps moist air inside the drum.

Crushed vent hose

A dryer pushed too close to the wall flattens the hose behind it.

Wrong cycle

Air-fluff and some eco or sensor cycles use little or no heat.

One side of the power supply is off

Electric dryers run on 240 volts through a double breaker, or two fuses in some older homes. If one side loses power, the drum can still turn but the heater gets nothing.

A failed heating part

A heating element, thermal fuse or igniter that has failed needs a technician.

Safe checks you can do yourself

  1. Check the cycle. Choose a timed cycle on high heat rather than air-fluff or a sensor cycle, and test with a small load.

  2. Clean the lint filter. Remove the lint, then wash the screen with warm soapy water if fabric softener has left a film on it.

  3. Check the vent hose. Unplug the dryer and ease it forward. Make sure the hose behind it is not crushed or kinked, and reconnect it if it has slipped off.

    Caution: On a gas dryer, move it gently and do not strain the gas connector.

  4. Check the outside vent. With the dryer running, go outside and feel for strong, warm airflow at the vent hood. Clear lint from the flap.

  5. Reset the breakers once. For an electric dryer, find its double breaker and switch it fully off, then back on. If your home has fuses, call an electrician rather than changing them yourself.

    Caution: If it trips again, leave it off and call a technician.

Manufacturer information

  • Your owner's manual says which cycles use heat and how to clean the lint filter housing for your model.
  • The model number is usually on a label inside the door opening.
  • In Ontario, work on a gas dryer's gas supply or burner must be done by a TSSA-certified gas technician working for a TSSA-registered contractor. Homes with a gas dryer also need a working carbon monoxide alarm on every storey and outside sleeping areas.

When to stop and call a professional

  • Airflow at the outside vent is strong but there is still no heat.
  • You have a gas dryer and the drum turns with no heat at all.
  • There is a burning smell, or the top of the dryer is too hot to touch.
  • The vent run is long or goes through the roof and needs a proper cleaning.

Common questions

How often should the dryer vent be cleaned?

Clean the lint filter after every load, and clean lint out of the vent duct at least once a year, more often if clothes start taking longer to dry (Ontario Fire Marshal advice).

Why does my dryer take two cycles to dry?

That is the classic sign of restricted airflow. Check the lint filter, the hose behind the dryer and the outside vent hood.

Tutorial videos

Watching someone do it helps. Look for videos from the manufacturer or an established repair channel, and check that the model shown matches yours.

Search YouTube for this repair

Need a professional in Mississauga?

If the checks above did not solve it, see local businesses from HomeMint's own list, matched on the service you need and the area they serve.

Appliance repair in Mississauga

About this guide. Written by HomeMint (AI-assisted) and reviewed by HomeMint Editorial. It is general information, not a professional inspection. Appliances and homes differ: follow your owner's manual and stop if anything seems unsafe. In an emergency call 911.